Bulk transport

Provide a detailed list of vehicle size, and the ro / ro shipping restrictions to tell customers, load restrictions are based on the actual ship norms, the ship can be divided into the following two categories:

Transport ship type：

European ship type：
Automatic force <100 tons without power <70 tons
(Need to follow the actual ship with the tail load capacity)
Chassis height> 20 cm
Body length <23 meters
Body width <6.5 meters
Body height <5.5 meters
(Subject to actual vessel hatch size)


Japan and South Korea ship type：
Automatic force <75 tons without power <65 tons
(Need to follow the actual ship with the tail load capacity)
Chassis height> 20 cm
Body length <18 meters
Body width <5.5 meters
Body height <5 meters
(Subject to actual vessel hatch size)


Quotes：

Booking fee
Sea freight: According to the customer car is divided into high cabin and low cabin two categories. High and low cabin is also based on the actual ship, according to the basic 2 meters 1 for the dividing line, in the size of the need to confirm with the owner. Compared with the high cabin tariffs, low cabin tariffs will be cheaper nearly 10 dollars or so.

Dockage
The fare: the goods with a trailer port, if no automatic, can not open their own trailers, plus the fare.
Trailer: When loading, if the vehicle does not have the driving state, need to be dragged into the cabin, the trailer fee. If no power can be loaded on the horse, into the cabin. Note: Rent a horse to pay the cost, up and down the horse must pay a separate lifting and banding reinforcement costs. Ma Fei can undertake major equipment, but does not advocate, because the use of Ma Fei need to pay a rent.


Set harbor：
1) The vehicle is equipped with fuel - the amount of fuel stored at the dock can be 50 km without stopping the oil and the oil can be supplied normally when the vehicle is up and down. North winter weather is cold, diesel vehicles must be added before the factory plus -20 or more than 30 diesel, so as to avoid diesel oil low temperature wax plug the oil can not start after the road. To ensure that the loading and unloading process will not be due to fuel problems and downtime;
2) to ensure that the vehicle in good condition, normal driving, and to ensure reliable vehicle braking, the battery can start the vehicle;
3) to ensure that the appearance of the vehicle in the delivery to the terminal / ship must be in good condition; and to ensure that the appearance of the vehicle clean. After the vehicle harbor, please remove the rear view mirror or folding the car, the outside of the vehicle to do the protection work, in the appearance of playing two to three degrees of protective wax, easy to rust parts such as chassis, Rust wax to corrosion;
4) In order to ensure the smooth loading of the vehicle, the maintenance personnel must provide the necessary guidance and assistance to the terminal at the time of shipment / shipment. If the vehicle is found to be defective and timely rectification, the vehicle itself is defective and fails to plan Ship the vehicle, I am irresponsible;
5) The reported harbor dynamics must be accurate and timely,
6) the front of the windshield inside the vehicle to be affixed by the attachment format mark, each car and spare parts are required to paste this mark;
7) Please inform the size of the goods accurately (referring to the vehicle including the body of the attachment of the maximum length, width, high edge of the size) to facilitate the Division I stowage, and please inform your company ground agent on-site staff contact, Three-way company will play with your company on-site staff to implement the size of the vehicle, if the size of the size is greater than the reported size, the freight will be measured by the amount of data prevail. Due to customer false positives or intentionally concealed size caused by the size of the scene increased, resulting in the scene rejection and additional costs and other losses, will be responsible for the customer. "Playing time to ask the customer" and I Acting Secretary to determine;
8) the truck kit must be locked with a lock, with the vehicle key with a clear transfer;
9) Reminder: In addition to the car kit can not have any spare parts, whether it is separated, or attached to the body. Except for the prior confirmation of my company's written confirmation. Special requirements, please put forward as soon as possible.

customs clearance：
Confirm in advance whether a license and a certificate are required.

Bill of lading：
Before the confirmation of the bill of lading, customers need to provide vehicle information: equipment identification number, vehicle chassis number, engine number and so on.